Similar to above, but pulleys in plastic with bearing to minimize friction, mounted in tandem on sheet metal strip with hooks on either side for suspension and loading. Open sheet metal frame painted with scratch-resistant epoxy coating. Accurately centered. Pulley configurations available are M1...

An economical set of pulleys for experiment with light to moderate loads. Incorporating 50 mm diameter plastic pulleys carried in tough plastic frames on free running central axles. The blocks are available in single, double sheave and triple sheave. The central axle pin can be conveniently remov...

Single piece cast aluminium pulley with 3 different diameters, 38, SO and 62mm respectively. M13523/1 Mounted in U-shaped metal frame with hook for suspention   M13523/2 mounted in metal frame with a transverse rod for attaching it to any right angle  clampM13523/3 3 Differential Pulley with rod ...

Aluminum pulleys, 38mm diameter, machine turned, having wide grooves for whip cord. Mounted in cast metal frame and accurately centered. Pulley configurations available are M13505/1 Single with 1 Hook M13505/2 Single with 2 Hooks M13505/3 Double Sheave (Parallel) M13505/4 Triple Sheave (Parallel)...

Similar to above in construction, but with one additional bulb mounted vertically above the first one giving a total of two bulbs with two independent sets of mica vanes. Both the vanes have black painted and bright sides configured opposite, so that their exposure to sunlight or sufficiently bri...

It is used to test the stretch and bearing strain of tread, wool, hair, wire etc. Provided in pair with an efficient griping system and may be supported from any laboratory stand while slotted weights are applied to the lower end to provide the stretching force. 

Specially designed apparatus for study and investigation into the stress and strain accompanying the torsion i.e., torsion modulus of rigidity of the substance. The apparatus consists of a two long metal mounting rods located vertically on a T shaped assembly and are jointed at the top through an...

Two cast iron feets each with 3 through holes and grub securing screws, separating by two support rods approx 600 mm long, one of which is graduated in cm and mm. The whee 1165 mm dia. over groove moving on ball bearings is provided with chuck to hold the test rod of 55 cm long and 5 mm dia with ...

Consists of an aluminum disc 25 cm diameter. Another small disc of iron C.P. having same diameter as the interior of a grooved area of the bigger disc. (the small disc has approx. 8 cm dia and 1.25 cm thickness). A tall U Shape metal bridge with a split chuck, fitted into disc enable accurate sus...